40pcs 40pcs qasabadaha & dhinta
Astaamaha
1. Dhismaha Xawaaraha Sare ee Birta (HSS).
2. Baaxadda cabbirrada
3.Qalabka waxaa ka mid noqon kara noocyo kala duwan oo qasabadaha ah sida tapers-ka, furayaasha iyo qasabadaha hoose si ay u buuxiyaan shuruudaha kala duwan ee dunta.
4. Dhimashada la hagaajin karo
5. Kaydka Kaydinta.
6. Xargaha saxda ah
7. Qalabkani wuxuu ku shaqeeyaa qalab kala duwan, oo ay ku jiraan birta, aluminium, naxaas, iyo biraha kale.
8. Waafaqid
9. Qalabka dheeraadka ah
Guud ahaan, 40-xabbo ee HSS tuubada iyo seeska dhinta waxay bixisaa doorasho balaadhan oo ah qalab lagu goynayo dunta gudaha iyo dibadda, taas oo ka dhigaysa mid qiimo leh oo lagu daro aqoon-is-weydaarsiyada, garaashyada baabuurta iyo deegaanka warshadaha.
BANDHIGGA wax soo saarka
warshad
tilmaamo
| Walxaha | Tilmaamid | Heerka |
| TAPS | Tuubooyinka gacanta ee toosan | ISO |
| DIN352 | ||
| DIN351 BSW/UNC/UNF | ||
| DIN2181 | ||
| Tuubooyinka mashiinka biibiile toosan | DIN371/M | |
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| DIN2181/UNC/UNF | ||
| DIN2181/BSW | ||
| DIN2183/UNC/UNF | ||
| DIN2183/BSW | ||
| Tuubooyinka caagagga leh | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Tuubooyinka fiiqan ee wareegsan | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Taabo taabo/ Samaynta taabo | ||
| Tuubada dunta tuubada | G/NPT/NPS/PT | |
| DIN5157 | ||
| DIN5156 | ||
| DIN353 | ||
| Tuubooyinka lowska | DIN357 | |
| Daloolin iyo taabo isku dhafan | ||
| Tuubooyinka oo dhinta dhigay |
| Cabbirka | L | Lc | d | k | godka hoose | |||||
| M2*0.4 | 40.00 | 12.00 | 3.00 | 2.50 | 1.60 | |||||
| M2.5*0.45 | 44.00 | 14.00 | 3.00 | 2.50 | 2.10 | |||||
| M3*0.5 | 46.00 | 11.00 | 4.00 | 3.20 | 2.50 | |||||
| M4*0.7 | 52.00 | 13.00 | 5.00 | 4.00 | 3.30 | |||||
| M5*0.8 | 60.00 | 16.00 | 5.50 | 4.50 | 4.20 | |||||
| M6*1.0 | 62.00 | 19.00 | 6.00 | 4.50 | 5.00 | |||||
| M8*1.25 | 70.00 | 22.00 | 6.20 | 5.00 | 6.80 | |||||
| M10*1.5 | 75.00 | 24.00 | 7.00 | 5.50 | 8.50 | |||||
| M12*1.75 | 82.00 | 29.00 | 8.50 | 6.50 | 10.30 | |||||
Halkan ku qor fariintaada oo noo soo dir
-
HSS Cobalt Annular Cutter oo leh Weldon Shank
-
99PCS HSS maroojin biibiile oo lagu dejiyay dhammayn tiitanium ah oo dahaarka leh
-
Kordhinta diyaaradda HSS Co M35 maroojin Drill Bit
-
HSS M2 Cutter Annular oo leh Weldon Shank
-
Hex-shiid kiimikaad ee HSS M2 maroojin oo leh daahan titanium
-
Hand Reamer oo leh biibiile taper ah